Investigating the Performance of the Flat Plate Collector with Photovoltaic Panel and Phase Change Material

Document Type : Original Research

Authors

1 Department of Agrotechnology, College of Abouraihan, University of Tehran, Tehran, Iran.

2 Department of Biosystem Engineering, Faculty of Agriculture, University of Kurdistan, Kurdistan, Iran.

10.22103/bbr.2025.24483.1108

Abstract

Solar energy is a kind of renewable energy which applicable in many industries, including agriculture. In this research, a new flat plate solar collector including phase change material (PCM) and photovoltaic panel were used to prevent the drying process interruption. In the system, the vertical copper tubes on the collector plate were filled by phase change materials to save extra thermal energy during the charging process. This saved thermal energy was then released in a latent form and helped to accelerate the drying process. Additionally, placing the phase change material beneath the photovoltaic panel effectively cooled the panel and improved its performance. Simulation results showed that paraffin, as the phase change material, effectively maintains thermal stability, increases drying speed, and enhances the system's efficiency. Therefore, this study will explore the potential of combining phase change material and photovoltaic technologies to design an optimized and more sustainable drying system for agricultural applications.

Keywords

Main Subjects


Abdullah, A. L., Misha, S., Tamaldin, N., Rosli, M., & Sachit, F. (2020). Theoretical study and indoor experimental validation of performance of the new photovoltaic thermal solar collector (PVT) based water system. Case Studies in Thermal Engineering, 18, 100595. https://doi.org/10.1016/j.csite.2020.100595
Abdulmunem, A. R., Samin, P. M., Rahman, H. A., Hussien, H. A., Mazali, I. I., & Ghazali, H. (2021). Numerical and experimental analysis of the tilt angle’s effects on the characteristics of the melting process of PCM-based as PV cell’s backside heat sink. Renewable Energy, 173, 520-530. https://doi.org/10.1016/j.renene.2021.04.014
Ahmadi, M., Samimi-Akhijahani, H., & Salami, P. (2023). Thermo-economic and drying kinetic analysis of Oleaster using a solar dryer integrated with phase change materials and recirculation system. Journal of Energy Storage, 68, 107351. https://doi.org/10.1016/j.est.2023.107351
Al-Aasam, A. B., Ibrahim, A., Sopian, K., Abdulsahib, B., & Dayer, M. (2023). Nanofluid-based photovoltaic thermal solar collector with nanoparticle-enhanced phase change material (Nano-PCM) and twisted absorber tubes. Case Studies in Thermal Engineering, 49, 103299. https://doi.org/10.1016/j.csite.2023.103299
Al-Waeli, A. H., Sopian, K., Chaichan, M. T., Kazem, H. A., Ibrahim, A., Mat, S., & Ruslan, M. H. (2017). Evaluation of the nanofluid and nano-PCM based photovoltaic thermal (PVT) system: An experimental study. Energy Conversion and Management, 151, 693-708. https://doi.org/10.1016/j.enconman.2017.09.032
Alzaabi, A. A., Badawiyeh, N. K., Hantoush, H. O., & Hamid, A. (2014). Electrical/thermal performance of hybrid PV/T system in Sharjah, UAE. International Journal of Smart Grid and Clean Energy, 3(4), 385-389. https://doi.org/10.12720/sgce.3.4.385-389
Aste, N., Leonforte, F., & Del Pero, C. (2015). Design, modeling and performance monitoring of a photovoltaic–thermal (PVT) water collector. Solar Energy, 112, 85-99. https://doi.org/10.1016/j.solener.2014.11.025
Gan, G., & Xiang, Y. (2020). Experimental investigation of a photovoltaic thermal collector with energy storage for power generation, building heating and natural ventilation. Renewable Energy, 150, 12-22. https://doi.org/10.1016/j.renene.2019.12.112
Hachem, F., Abdulhay, B., Ramadan, M., El Hage, H., El Rab, M. G., & Khaled, M. (2017). Improving the performance of photovoltaic cells using pure and combined phase change materials–Experiments and transient energy balance. Renewable Energy, 107, 567-575. https://doi.org/10.1016/j.renene.2017.02.032
Iranmanesh, M., Akhijahani, H. S., & Jahromi, M. S. B. (2020). CFD modeling and evaluation the performance of a solar cabinet dryer equipped with evacuated tube solar collector and thermal storage system. Renewable Energy, 145, 1192-1213. https://doi.org/10.1016/j.renene.2019.06.038
Kazemian, A., Salari, A., Hakkaki-Fard, A., & Ma, T. (2019). Numerical investigation and parametric analysis of a photovoltaic thermal system integrated with phase change material. Applied energy, 238, 734-746. https://doi.org/10.1016/j.apenergy.2019.01.103
Panwar, N. L., Kaushik, S. C., & Kothari, S. (2011). Role of renewable energy sources in environmental protection: A review. Renewable and Sustainable Energy Reviews, 15(3), 1513-1524. https://doi.org/10.1016/j.rser.2010.11.037
Siecker, J., Kusakana, K., & Numbi, e. B. (2017). A review of solar photovoltaic systems cooling technologies. Renewable and Sustainable Energy Reviews, 79, 192-203. https://doi.org/10.1016/j.rser.2017.05.053
Sorkhani, S., Iranmanesh, M., & Gholamrezaei, N. (2022). Damage Detection and Performance Evaluation of Photovoltaic Panels Used in Rural Area through Thermography Analysis. Biomechanism and Bioenergy Research, 1(2), 74-79. https://doi.org/10.22103/bbr.2022.20681.1036
Su, D., Jia, Y., Alva, G., Liu, L., & Fang, G. (2017). Comparative analyses on dynamic performances of photovoltaic–thermal solar collectors integrated with phase change materials. Energy Conversion and Management, 131, 79-89. https://doi.org/10.1016/j.enconman.2016.11.002
Vigneshkumar, N., Venkatasudhahar, M., Kumar, P. M., Ramesh, A., Subbiah, R., Stalin, P. M. J., Suresh, V., Kumar, M. N., Monith, S., & Kriuthikeswaran, M. (2021). Investigation on indirect solar dryer for drying sliced potatoes using phase change materials (PCM). Materials Today: Proceedings, 47, 5233-5238. https://doi.org/10.1016/j.matpr.2021.05.562